Sliding The Server Into The Rack - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX1330 M4:

Table of Contents

Basic hardware procedures

Sliding the server into the rack

Figure 26: Sliding the server into the rack

Ê Release the locking mechanism of both rack rails (1).

Ê Push the server as far as it will go into the rack (2) until the quick release

levers engage.

Be careful with your fingers. You can pinch them when the quick-

release levers change to the release position.

Ê Connect all cables except the power cord to the server rear.

Upgrade and Maintenance Manual

Table of Contents