Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander board, see section
SAS expander board" on page 255
Ê If applicable, remove the expansion cards, see section
expansion cards" on page 285
14.3.1.2 Installing the TPM
I
The onboard position of the TPM connector can be found in section
"Onboard connectors" on page
Figure 275: Position for the TPM spacer
Figure 276: Inserting the TPM spacer on the system board
Ê Insert the TPM spacer into the hole on the system board.
Figure 277: TPM bit insert
Ê Attach the TPM bit insert or TPM module fixing tool (for Japan) to a bit screw
driver.
TX1330 M4
455.
Upgrade and Maintenance Manual
System board and components
"Removing the system fan
"Removing
"Removing the
389