Basic Information; Upgrading Or Replacing The Cpu; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Processor (CPU)
11.1

Basic information

The system board D3673 offers one socket for Intel Xeon CPUs.
Supported CPUs
– Intel Xeon E3-12nnV6 series CPUs and Pentium G4560, Core i3-7100
– Socket type: LGA 1150 package
– Thermal Design Power (TDP) class: up to 80 W
I
For system relevant information, see the hardware configurator of your
server available online at the following address:
http://ts.fujitsu.com/products/standard_servers/index.html
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/
11.2

Upgrading or replacing the CPU

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
V
CAUTION!
CPUs are modules which are extremely sensitive to electro-static
discharges and therefore must always be handled with care. After a CPU
has been removed from its protective sleeve or from its socket, place it
with its smooth side down on a non-conducting, antistatic surface. Never
push a CPU over a surface.

11.2.1 Preliminary steps

Ê If applicable, "Locating the defective server" on page 51
"Suspending BitLocker functionality" on page 97
Ê
"Shutting down the server" on page 53
Ê
320 Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
TX1330 M4