Clearing The Sel - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Under Monitored Components the monitored components are listed. If
a component has the status Warning or Error, you can select it in the list
and click Acknowledge. This confirms the event on the server side. You
may have to log on to the server beforehand. The status of the
component will then be reset to ok. To see the new status you must
refresh the Driver Monitor view with Refresh.
I
For more information on how to view and sort the SEL using ServerView
Operations Manager, see the "ServerView Operations Manager - Server
Management" user guide.
Viewing the SEL using the iRMC web interface
Ê Log in to the ServerView iRMC web interface.
Ê Open the Logs menu.
Ê Click System Event Log to open the System Event Log page.
All events concerning the system are displayed in a table in the Event Log
Content group.
Ê You can sort the table based on a column using the arrows in the header
field.
Ê You can also filter the table using the filter lists in the header of some
columns.
I
For more information on iRMC settings, see the iRMC user guides.

5.2.12.2 Clearing the SEL

You can clear the System Event Log (SEL) using the ServerView iRMC web
interface:
Ê Log in to the ServerView iRMC web interface.
Ê Open the Logs menu.
Ê Click System Event Log to open the System Event Log page.
All events concerning the system are displayed ina table in the Event Log
Content group.
Ê Click the Clear Logs button below the table to clear the SEL.
I
For more information on iRMC settings, see the iRMC user guides.
TX1330 M4
Upgrade and Maintenance Manual
Basic software procedures
115