Basic Information - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.1

Basic information

The HDD or SSD and the installation frame together make up the HDD module
or SSD module.
The server is shipped with one of the following HDD or SSD subsystems:
– 3.5-inch HDD subsystem:
Up to four, eight or 12 3.5-inch SAS/SATA HDD modules can be installed.
The HDD module is connected to the HDD backplane wirelessly. This allows
HDD modules to be plugged in or pulled out easily.
If the server has a corresponding RAID configuration, defective HDD/SSD
modules can also be replaced during operation.
– 2.5-inch HDD/SSD subsystem:
Up to eight, 16, or 24 2.5-inch SAS/SATA HDD/SSD modules can be
installed. The HDD/SSD module is connected to the HDD backplane
wirelessly. This allows HDD/SSD modules to be plugged in or pulled out
easily. I
f the server has a corresponding RAID configuration, defective HDD/SSD
modules can also be replaced during operation.
I
In the configuration with up to 12x 3.5-inch HDDs or 24x 2.5-inch
HDD/SSDs, up to four PCIe SSDs can be installed in the 8x 2.5
HDD/SSD extension box.
I
For information on RAID controllers controlling the HDD/SSD modules
see chapter
162
"Expansion cards and backup units" on page
Upgrade and Maintenance Manual
269.
TX1330 M4