Concluding Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components
Figure 278: Installing the TPM
Ê Connect the TPM to the system board (1).
Ê Fasten the TPM with the special screw for the TPM using the TPM bit insert
or TPM module fixing tool (Japan) (2).
V
CAUTION!
Do not fasten the screw too firmly. Stop it by extent where the head
of the screw lightly touches the TPM (torque value of 0.6 Nm, the
description of this torque value doesn't apply to Japan).

14.3.1.3 Concluding steps

Ê If applicable, install the SAS expander board, see section
expander board" on page
Ê Install the system fan module, see section
on page 83
Ê If applicable, install the expansion cards, see section
cards" on page 279
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
"Resuming BitLocker functionality" on page 117
Ê
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, enter the BIOS setup menu.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
390
251.
Upgrade and Maintenance Manual
"Installing the SAS
"Installing the system fan module"
"Installing expansion
TX1330 M4