Replacing An Fbu; Preliminary Steps; Removing The Defective Fbu - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.3

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Dispose of used battery properly. Keep away from children.
●
Do not throw battery backup units into the trash can. Batteries must
●
be disposed of in accordance with local regulations concerning
special waste.
9.5.3.1

Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander holder without disconnecting
cables, see section
Position the SAS expander holder on the HDD cages to get more space.
"Locating the defective component" on page 52
Ê
9.5.3.2

Removing the defective FBU

Ê Remove the FBU with the FBU holder, see section
page 304.
Ê Remove the FBU from the FBU holder, see section
the FBU holder" on page
308
"Removing the SAS expander holder" on page
307.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing the system fan
"Removing an FBU" on
"Removing the FBU from
256.
TX1330 M4