Removing The Anti-Tilt Bracket - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 54: Installing the anti-tilt bracket (B)
Ê Fasten the anti-tilt bracket on the rear of the server with two knurled thumb
screws.

4.10.2 Removing the anti-tilt bracket

Ê Loosen the two knurled thumb screws on the anti-tilt bracket (see figure 54).
Ê Remove the anti-tilt bracket from the rear of the server.
Upgrade and Maintenance Manual 95
TX1330 M4