Hard disk drives (HDD) / solid state drives (SSD)
7.5.2.4
Installing the 8x 2.5-inch HDD/SSD extension box
Figure 144: Bending in mounting brackets
Ê Using a screw driver, bend the four mounting brackets of the middle
installation bay (bay 2) inwards (see close-up):
Ê Bend in the lower two mounting brackets on each side of the drive cage.
Ê Open the accessible drive locking bar, see section
drive locking bar" on page
230
86.
Upgrade and Maintenance Manual
"Opening the accessible
TX1330 M4