Removing A Slot Bracket - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Expansion cards and backup units
Example: EP4x0i
Figure 180: Placing the slot bracket
Ê Place the controller on the slot bracket (see arrow).
Ê Secure the slot bracket to the expansion card with two screws (see circles).
9.2.2

Removing a slot bracket

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Removing the slot bracket
Ê Remove the two screws.
Ê Remove the controller from the mounting tabs on the slot bracket.
272 Upgrade and Maintenance Manual
Hardware: 5 minutes
TX1330 M4