Removing The Sas Expander Holder - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.6.2.2

Removing the SAS expander holder

Figure 169: Removing the SAS expander holder
Ê Remove the intrusion switch cable from the cable clamp (1).
Ê Remove the knurled screw (see circle).
Ê Slide the SAS expander board holder in the direction of the arrow and take
it out of the chassis.
Ê Disconnect all cables from the expander board.
256 Upgrade and Maintenance Manual
TX1330 M4