Removing The M.2 Ssd; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components
I
For Japan
In order to setup the ESXi, see the corresponding version of the "VMware
vSphere Software Description" from the following URL and reinstall ESXi
to the M.2 SSD.
http://jp.fujitsu.com/platform/server/primergy/software/vmware/manual/

14.5.2 Removing the M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Hexagon screw driver (for moving the screw to another hexagon
stand-off)

14.5.2.1 Preliminary steps

"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
Ê If applicable, remove the SAS expander holder without disconnecting
cables, see section
Position the SAS expander holder on the HDD cages to get more space.
Ê If applicable, "Removing expansion cards" on page 285
406
"Removing the SAS expander holder" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the system fan
256.
TX1330 M4