Accessible drives
Ê If applicable,
"Verifying and configuring the backup software solution" on
page 100
12.6
Ultraslim ODD in 4x 3.5-inch HDD extension
box
12.6.1 Installing the ultraslim ODD
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
12.6.1.1 Preliminary steps
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install an
ultraslim ODD, skip this step.
Ê If applicable,
"Removing the 4x 3.5-inch HDD extension box" on page 246
360
Upgrade and Maintenance Manual
Hardware: 10 minutes
TX1330 M4