Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 283

Figure 193: PRAID EP5x0i - Connecting cables (B)
Ê Connect the cables of the PRAID EP5x0i:
1 If applicable, FBU cable to the FBU
2 HDD LED cable to connector "HDD LED" on the system board
3 SAS cables or Oculink cables to the backplanes (depending on the
configuration)
For Oculink cables:
Color
red
yellow
green
black
I
For the cable plan, see chapter
TX1330 M4
Connector on EP5x0i
"Appendix B" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
Connector on PCIe
C0
C1
C2
C3
SSD backplane
P3_X4
P2_X3
P1_X2
P0_X1
477.
283