Accessible drives
Ê If the removed ultraslim ODD is not to be replaced by a new drive:
Ê Fasten the locking latch to the ultraslim ODD with its two original screws
to the HDD cage (see figure 256).
Ê Insert the ultraslim ODD dummy cover (see figure 255).
12.6.2.4 Installing the 4x 3.5-inch HDD extension box
Ê Install the 4x 3.5-inch HDD extension box, see section
inch HDD extension box" on page
12.6.2.5 Concluding steps
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
12.6.3 Replacing the ultraslim ODD
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
12.6.3.1 Preliminary steps
"Locating the defective server" on page 51
Ê
"Removing backup and optical disk media" on page 99
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
I
Removing the front cover is not required in order to replace the
ultraslim ODD in the 4x 3.5-inch HDD extension box.
366
241.
Upgrade and Maintenance Manual
"Installing the 4x 3.5-
Hardware: 10 minutes
TX1330 M4