Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 189

Hide thumbs Also See for PRIMERGY TX1330 M4:

Table of Contents

Figure 107: Installing the new 4x 3.5-inch HDD SAS backplane (B)

Ê Ensure that the 4x 3.5-inch HDD SAS backplane is properly seated into the

bottom rim and side guide (see arrows).

Ê Ensure that the upper edge of the SAS backplane is flush with the HDD bay

divider wall (see dashed line).

Hard disk drives (HDD) / solid state drives (SSD)

Upgrade and Maintenance Manual

Chapters

Table of Contents