Installing The Sas Expander Holder - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drives (HDD) / solid state drives (SSD)
7.6.1.4

Installing the SAS expander holder

Figure 167: Installing the SAS expander holder (A)
Ê Take note of the two recesses (see circles).
Figure 168: Installing the SAS expander holder (B)
Ê Place the expander board that the two hooks fit with the two recesses (see
oval).
Ê Fasten the expander board with the knurled screw (see circle)
Ê Route the intrusion switch cable as shown (1).
254 Upgrade and Maintenance Manual
TX1330 M4