Removing An Accessible Drive; Installing Accessible Drive Dummy Covers - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Accessible drives

12.3.2 Removing an accessible drive

Ê Remove all cables from the accessible drive.
Ê Open the locking bar, see section
on page 86.
Figure 245: Removing the accessible drive
Ê Carefully pull the accessible drive out of its installation bay.
Ê Close the locking bar, see section
on page 88.

12.3.3 Installing accessible drive dummy covers

Ê If applicable, install accessible drive filler covers, see section
drive filler covers" on page
Ê If applicable, install accessible drive covers, see section
covers" on page
348
"Opening the accessible drive locking bar"
"Closing the accessible drive locking bar"
90.
92.
Upgrade and Maintenance Manual
"Accessible
"Accessible drive
TX1330 M4