Replacing The Dual Microsd 64Gb Enterprise; Preliminary Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

System board and components

14.6.3 Replacing the Dual microSD 64GB Enterprise

Upgrade and Repair Unit
(URU)
Tools: tool-less

14.6.3.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting the power cord" on page 54
Ê
"Getting access to the component" on page 55
Ê
Ê Remove the system fan module, see section
module" on page 81
14.6.3.2 Replacing the Dual microSD 64GB Enterprise
Ê Remove the defective Dual microSD 64GB Enterprise, see section
"Removing the Dual microSD 64GB Enterprise" on page
Ê Remove both microSD cards from the defective Dual microSD 64GB
Enterprise. Proceed as described in the following:
Figure 294: Removing the microSD card
Ê To eject the microSD card, gently push it in and then let go (1).
Ê Pull the microSD card straight out of its slot (2).
Ê Install both microSD cards on the new Dual microSD 64GB Enterprise.
Proceed as described in the following:
414 Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the system fan
412.
TX1330 M4