Hard disk drives (HDD) / solid state drives (SSD)
7.5.2.5
Connecting cables
Example with 8x 2.5-inch HDD/SSD backplane
Figure 146: Connecting the 8x 2.5-inch HDD/SSD extension box
Ê Connect the cables to the backplane:
1
SAS cable to backplane connector "X9"
2
Power cable
3
If applicable, OOB cable
4
SAS cable to backplane connector "X10"
I
For more information about connecting SAS cables to the SAS expander
board, see section
page
252.
I
For the cable plan, see chapter
232
"Connecting cables to the SAS expander board" on
"Appendix B" on page
Upgrade and Maintenance Manual
477.
TX1330 M4