Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual page 243

Figure 156: Inserting the 4x 3.5 HDD extension box
Ê If applicable, route the cables of the ultraslim ODD through the bay.
Ê Insert the 4x 3.5-inch HDD extension box into installation bays 1 to 3 and
carefully push in until it lines up with the front panel.
Ê Close the locking bar, see section
on page 88.
TX1330 M4
Hard disk drives (HDD) / solid state drives (SSD)
"Closing the accessible drive locking bar"
Upgrade and Maintenance Manual 243