Hard disk drives (HDD) / solid state drives (SSD)
7.4.9.6
Connecting cables
Example 8x 2.5-inch HDD/SSD configuration (backplane 1)
Figure 138: Connecting cables to the backplane (example 8x 2.5-inch HDD/SSD)
Ê Connect the cables to the backplane:
1
If applicable, riser card power cable
2
SAS cable to backplane connector "X9"
3
If applicable, OOB cable
4
Power cable
5
SAS cable to backplane connector "X10"
I
For the cable plan, see chapter
Configuration with SAS expander board
Ê For the cabling with a SAS expander board, see section
to the SAS expander board" on page
I
For the cable plan, see chapter
222
"Appendix B" on page
"Appendix B" on page
Upgrade and Maintenance Manual
252.
477.
"Connecting cables
477.
TX1330 M4