Concluding Steps - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

11.2.7 Concluding steps

Ê Install the system fan module, see section
on page 83
"Reassembling" on page 67
Ê
"Connecting the power cord" on page 78
Ê
"Switching on the server" on page 80
Ê
I
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the
message CPU has been changed.
This only indicates that the CPU configuration has been altered.
There is no technical problem.
Proceed as follows:
Ê Restart your server.
Ê As soon as the startup screen appears, press the [F2] function
key to enter the BIOS.
If a password is assigned, enter the password and press [Enter].
Ê Select the Save & Exit menu.
Ê Select Save Changes and Exit or Save Changes and Reset.
Ê Verify that the Global Error indicator stops flashing.
Ê If applicable, "Updating or recovering the BIOS and the iRMC S5" on
page 102
"Resetting the error status after replacing memory modules or CPUs" on
Ê
page 108
"Enabling replaced components in the BIOS" on page 112
Ê
"Resuming BitLocker functionality" on page 117
Ê
TX1330 M4
Upgrade and Maintenance Manual
Processor (CPU)
"Installing the system fan module"
331