Installing The Slot Cover; Concluding Steps - Fujitsu PRIMERGY RX1330 M1 Upgrade And Maintenance Manual

9.4.2.3

Installing the slot cover

Figure 108: Installing the slot cover - example riser module 1
Ê Insert the slot cover. Make sure that the lug on the slot cover (A) clicks into
place in the corresponding hole.
9.4.2.4

Concluding steps

Ê Install the corresponding riser module as described in section
riser module" on page
"Reassembling" on page 52
Ê
"Connecting the server to the mains" on page 55
Ê
"Switching on the server" on page 57
Ê
"Resuming BitLocker functionality" on page 84
Ê
RX1330 M1
60.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Installing a
173