Output Of Warning Messages On The Can Bus; Output Of Warning Messages To Info Interface - Siemens VDO DTCO 1381 Technical Description

Events and faults

13.1.2 Output of warning messages on the CAN bus

13.1.3 Output of warning messages to info interface

Edition 07/2007
The DTCO 1381 sends the status of the tachograph as part of the
TCO1 message (error status, data byte 4).
Warning messages will be sent as "System Event (SE)".
The error status is emitted on the CAN bus until the warning
message is acknowledged by pressing the button
Certain warning messages will be cyclically emitted on the CAN bus
until the cause has been remedied or is no longer active.
The DTCO 1381 sends the status of the tachograph as part of the
data information (error status, data byte 12).
Warning messages will be sent as "System Event (SE)".
The error status is emitted on the info interface until the warning
message is acknowledged by pressing the button
Certain warning messages will be cyclically emitted on the info
interface until the cause has been remedied or is no longer active.
Technical Description DTCO 1381
13.1 General information about messages
.
.
13 - 5