Table of Contents
Advertisement
3.4 Calibration mode
3.4
Calibration mode
3.4.1 Inserting workshop card
3 - 16
Authorized persons who are charged with calibration, activation,
testing, etc. will receive a workshop card. In addition to performing
workshop functions, the holder can also drive with this card.
If the authentication is positive, the following functions will be acti-
vated:
•
Calibration
•
Test
•
Data download
When the calibration mode is active, the display of the DTCO 1381
will show the pictogram " ".
The following description of "Inserting workshop card" is based on a
DTCO 1381 that is already activated.
For detailed information on activating the DTCO 1381, see chapter
9.3 "Performing the activation", page 9-8.
Fig. 3 - 1:
Inserting workshop card
1. Switch ignition on (required only for ADR variant).
2. Eject any tachograph cards that may be already inserted.
3. Insert workshop card into card slot 1 with the chip facing up
(after insertion, the card will be automatically locked mechani-
cally).
• The subsequent procedure is menu-guided.
© Siemens VDO Automotive AG
Operating the DTCO 1381
Edition 07/2007
Advertisement
Chapters
Table of Contents
