12.2 Buffer battery
12.2.5 Mounting the DTCO 1381
12 - 8
2
3
5
Fig. 12 - 3: Mounting the DTCO 1381 in the radio compartment
1. On the rear of the DTCO 1381 (2) press the mounting cap (5)
onto the spacer (3) or the threaded bolt (4).
2. Then push the DTCO 1381 (2) into the mounting frame (1) until
it engages in the frame and the cover is flush with the console.
There is usually a mounting bracket with a hole (6) on the rear wall
of the radio compartment. When the DTCO 1381 is pushed in, the
fastening cap (5) locks into this hole.
Attention!
When inserting the DTCO 1381 into the installation frame, make
sure that none of the cables become pinched and damaged!
© Siemens VDO Automotive AG
Maintenance and cleaning
1
4
5
Edition 07/2007
6