Table of Contents
Advertisement
Operating the DTCO 1381
Menu navigation after inserting workshop card
Step / menu display
1
2
3
4
5
Edition 07/2007
If the workshop card does not contain a preferred language or if the
language is not available in the DTCO 1381, the text will appear in
the language of the issuing member state, see chapter 3.2.1
"Selecting the text language", page 3-5.
Explanation / meaning
Greeting text; the set local time (14:00) and the UTC time (12:00)
will appear for approximately 3 seconds.
The DTCO 1381 is reading the workshop card.
The symbol for the current mode, operational mode, appears and a
progress bar shows that the DTCO 1381 is reading the card.
The name of the cardholder appears.
Select the number of characters (at least 4, max. 8)
– Select the number of characters with the button
– acknowledge with the button
PIN entry
" 0" 1. character to be entered will blink:
– Select the first character with the button
– acknowledge with the button
" 0" 2. character to be entered will blink:
– Select the second character with the button
– acknowledge with the button
– Follow the same procedure to enter the other characters of the
PIN.
Correcting an incorrectly entered character or an incorrectly
entered number of characters
– Press the button
the query for the number of characters,
– use the button
or
of characters and
– acknowledge with the button
Technical Description DTCO 1381
.
.
.
to move back to the previous character or to
to select the desired character or number
.
3.4 Calibration mode
or
and
or
and
or
and
3 - 17
Advertisement
Chapters
Table of Contents
