Messages Shown In The Display; Additional Pictograms In The Calibration Mode - Siemens VDO DTCO 1381 Technical Description

13.1 General information about messages

13.1.1 Messages shown in the display

1 2

Additional pictograms in the calibration mode

4
13 - 4
Messages in the display are comprised of the following elements:
(1) Pictograms or pictogram combinations (specified by law).
(2) Error text
3
(3) Memory code (MC = position in error memory)
During a warning message, the backlighting of the display is addi-
tionally flashing for about 30 seconds or until the warning message
will be acknowledged.
The corresponding pictograms or pictogram combinations and infor-
mational text in a warning message are displayed (independently of
the display's blinking background) until the button
acknowledge the message.
Certain warning messages will be cyclically displayed to the user
until the cause has been remedied or is no longer active.
In the calibration mode, some warning messages are displayed with
greater detail afforded by additional pictograms.
To permit better differentiation of some warning messages that
have the same error text but may have different causes in the
device, an additional pictogram (letter) (4) will appear in the "Cali-
bration" mode that is not specified in CR (EEC) 3821/85, annex I B.
This additional pictogram will not be shown when printing or dis-
playing data.
© Siemens VDO Automotive AG
Events and faults
is pressed to
Edition 07/2007