Regularly inspection
11.2 Calibration instructions
11.2.1 Legal requirements for when to perform a calibration
11.2.2 Access to the calibration functions
Edition 07/2007
The CR (EEC) 3821/85, annex I B, defines the criteria for the cali-
bration of EC recording equipment.
Note the legal provisions applicable in your country and check, how
the calibration must be performed and whether further tests of the
EC recording equipment are prescribed.
The recording equipment must be calibrated:
•
after every installation
•
during every regularly inspection
Before activation of the DTCO 1381 to be EC recording equipment, it
will be possible to access the calibration functions through the cali-
bration interface, the CAN bus diagnosis, or the K-Line diagnosis
without a workshop card.
After activation of the DTCO 1381, it will be possible to access the
calibration functions only with a workshop card.
The accredited workshop must guarantee that the calibration is per-
formed only via one interface selected before and that the cali-
bration functions of the other interfaces are deactivated.
Technical Description DTCO 1381
11.2 Calibration instructions
11 - 5