Operational Notes As Information - Siemens VDO DTCO 1381 Technical Description

3.2 Display variations
Menu display

3.2.8 Operational notes as information

Menu display
3 - 10
Explanation / meaning
Restart
After activation, a power interruption or a failed self-test, the DTCO 1381
carries out a restart, the version of the operating software appears
(xx.xx.xx) for approximately 5 seconds
If the restart occurs as the result of a power interruption, the DTCO 1381
indicates "power interruption".
➥ Detailed information, see chapter 9.3 "Performing the activation",
page 9-8, chapter 14.1.4 "Power interruption (Safe Mode)", page 14-6
or chapter 14.1.5 "Emergency run after self-test", page 14-7.
Explanation / meaning
The menu function cannot be called up since, in the card slot, no driver /
workshop card is inserted, or a company card / control card is inserted.
The UTC time was already corrected within the last seven days.
or
You are trying to correct the UTC time between one minute before and
one minute after midnight.
Feedback that the DTCO 1381 started the printout.
Feedback that the DTCO 1381 saved the entry.
No data can be displayed as long as the printing is in progress.
The tachograph card has not yet been read completely. It is not possible
to call up menu functions.
These operational notes disappear automatically after three
seconds. No steps must be taken.
© Siemens VDO Automotive AG
Operating the DTCO 1381
Edition 07/2007