Connection Plug A - Siemens VDO DTCO 1381 Technical Description

5.5 Performing the installation

Connection plug A

blue bl
brown br
yellow ye
gray gr
green gn
light blue lbl
red rd
black blk
white wt
brown-black brblk
red-grey rdgr
Fig. 5 - 17: Connect the DTCO 1381 connection plug A
5 - 30
Caution! Danger of short circuits
Always observe the vehicle manufacturer's instructions when exe-
cuting the following work steps!
1. Separate the vehicle's battery from the on-board power supply.
or
Interrupt the respective power circuit by removing the fuse.
2. Then insert the white plug (1) into the connection plug "A" on
the DTCO 1381.
3. Reconnect vehicle battery.
or
Re-insert the fuses.
© Siemens VDO Automotive AG
1
Installation
Edition 07/2007