Table of Contents
Advertisement
General instructions
Personnel prerequisites
Installation
Activation and calibration
Technical prerequisites
X
In the following instructions, the manufacturer assumes that the
personnel possess extensive professional knowledge, securely
master the necessary technical activities, and have been trained in
the use of the DTCO 1381 components as appropriate for the area of
application.
The persons who are charged with the installation of the DTCO 1381
components must complete a training program on the installation
of the DTCO 1381 components.
The persons who are charged with the activation and calibration of
the DTCO 1381 components must:
•
have a valid workshop card.
•
complete a training program on the installation, calibration, and
activation of the DTCO 1381 components.
•
(in Germany) also fulfil the conditions for executing tasks
according to §57b.
When installing the DTCO 1381 please obey the valid legal regula-
tions in your country!
The following requirements must be fulfilled in order to carry out
the assigned tasks:
•
The equipment and tools required or recommended by the man-
ufacturer must be available.
•
The equipment, testing devices, and furnishings must comply
with the respective valid legal requirements for the country in
which they are used.
© Siemens VDO Automotive AG
Edition 07/2007
Advertisement
Chapters
Table of Contents
