Table of Contents
Advertisement
Operating the DTCO 1381
3.2.4 Standard display
Menu display
1
2 3
4
5
6
7
8
2
Edition 07/2007
Explanation / meaning
As soon as the vehicle starts moving, the standard display appears auto-
matically.
(1)
Time; the example shows local time
(2)
Symbol of the displayed time
with symbol ( ) = set local time
without symbol ( ) = UTC time
(3)
Mode; example shows "operational mode", symbol " "
9
(4)
Speed
(5)
Activity, driver 1
(6)
Card symbol, driver 1 (card slot 1)
The card symbol indicates that the DTCO 1381 has correctly read-in
the tachograph card
(7)
Total odometer
(8)
Card symbol, driver 2 (card slot 2)
The card symbol indicates that the DTCO 1381 has correctly read-in
the tachograph card
(9)
Activity, driver 2
Remark
The DTCO 1381 can be equipped with the option "Automatic setting of
the activities after ignition on/off".
This means: When the vehicle is not moving and the ignition is switched
on or off, the DTCO 1381 switches automatically to a defined activity, for
example " ". The activity (5) and/or (9) which changes automatically on
the basis of ignition on or off, flashes for ca. 5 seconds.
Which activity is triggered automatically by the DTCO 1381 on switching
the ignition on or off can be programmed according to the customer's
wishes by an authorised workshop.
Data displayed while driving
Press any menu key while driving and the times driven by both drivers will
appear.
The standard display will appear again after any key is pressed again or
after 10 seconds.
1
(1)
Times of driver 1:
Driving time " " since a break of 45 minutes and valid break " "
(cumulative pause time in partial breaks of at least 15 minutes).
(2)
Times of driver 2:
Current activity availability time " " and duration of activity.
Technical Description DTCO 1381
3.2 Display variations
3 - 7
Advertisement
Chapters
Table of Contents
