Table of Contents
Advertisement
14.4 Explanation of printout examples
Pos. / block
Data block specification / explanation
Time settings
17
Listing of all available data about time setting (in data sets)
17a
• Date and time, old
• Date and time, changed
• Name of workshop that set the time
• Address of workshop
• Workshop identification
• Workshop card valid until ...
Remark
17b
In the second data set it can be seen that the UTC time was corrected by an authorized
workshop.
The most recently recorded event and the current fault
18
•
= Most recent event, date, and time.
•
= Most recent fault, date, and time.
Information on overspeeding control
19
• Date and time of the most recent control.
• Date and time of the first instance of overspeeding since the most recent control and
the number of subsequent overspeeding instances.
First instance of overspeeding since the most recent calibration
20
The five most severe instances of overspeeding of the last 365 days
20a
The most severe instances of overspeeding on the 10 most recent days of
20b
appearance
Entries during instances of overspeeding (chronologically arranged by highest
20c
average speed)
• Date, time, and duration of overspeeding
• Highest and average speed of the overspeeding instance, number of similar events on
this day
• Last name of driver
• First name of driver
• Card identification of the driver
Remark
If no data set for an instance of overspeeding appears in a block, then the following
appears: "
14 - 28
".
© Siemens VDO Automotive AG
Appendix
Edition 07/2007
Advertisement
Chapters
Table of Contents
