Siemens VDO DTCO 1381 Technical Description page 247

Events and faults
DTCO 1381 display
Picto. Error text
Edition 07/2007
MC Error code Meaning, cause and measures
00000005B3 A printout will be delayed or cancelled.
Possible causes
•
Measures
– After a long printout, the print head temperature is too high;
The printout will automatically continue as soon as these param-
eters are again within the specified range.
If the error message continues to appear despite these measures,
replace the DTCO 1381.
00000005B3 In one of the following situations it is determined that the printer
drawer is open:
•
•
•
The ejection of the tachograph card is delayed until the printer
drawer is closed. A printout in progress will be interrupted or any
print request will be rejected.
Possible causes
•
Measures
– Check whether the printer drawer is open and closed if nec-
If the error message continues to appear despite these measures,
replace the DTCO 1381.
8000000660 It is determined during a printout or during a print request that
there is no paper in the printer. The printout in progress is inter-
rupted and the previously printed part automatically marked or the
print request is rejected.
Possible causes
•
•
Measures
– Check whether there is paper in the printer and insert a new
After a new roll of printer paper is inserted, it will be automatically
marked and the interrupted printout will be continued
If the error message continues to appear despite these measures,
replace the DTCO 1381.
Technical Description DTCO 1381
13.4 Messages and troubleshooting measures
Printing head has overheated
wait to cool.
withdrawing a tachograph card
requesting a printout
during a printout
Printer drawer is open
essary.
No printer paper has been inserted
All printer paper has been used
roll if necessary.
13 - 15