Removing Workshop Card; Menu Navigation After Removing Workshop Card - Siemens VDO DTCO 1381 Technical Description

Activation

9.3.2 Removing workshop card

Menu navigation after removing workshop card

Step / menu display
1
2
3
4
5
Edition 07/2007
1. Press the ejection button
workshop card is located.
• The subsequent procedure is menu-guided.
2. After the card has been released (mechanical unlocking of the
card), remove the workshop card from the card slot.
3. Use the button
as " ".
The DTCO 1381 automatically sets the calibration date and the
purpose of the calibration (1) when the workshop card is removed.
Via the menu functions you can print (printout vehicle "technical
data") or display (display vehicle "technical data") the calibration
date and the purpose for the calibration.
Explanation / meaning
The name of the cardholder appears; a progress bar shows that the
DTCO 1381 is transferring data to the workshop card.
Enter country at the end of the workday
– Select the country with the button
– acknowledge with the button
Cancel entry of country
– Press the button
Select region if required
– Select the region with the button
– acknowledge with the button
Continuation of data transfer to workshop card.
Print day value
– To print the day value, select "
select " " and
– acknowledge with the button
Continuation of data transfer to workshop card.
Technical Description DTCO 1381
9.3 Performing the activation
of the card slot in which the
or to set the respective activity, such
or
.
to cancel the entry of the country.
or
.
" with the button
.
and
and
or , or
9 - 11