Table of Contents
Advertisement
Regularly inspection
Device-specific parameters
Other parameter
Edition 07/2007
Depending on the variation of the DTCO 1381, other parameters
that are not legally-stipulated must be updated or acknowledged:
•
n-constant
•
Drive shaft I/U
•
etc.
Other parameters can be updated or acknowledged if necessary:
•
Installation date
•
Date of the next calibration
•
etc.
Attention!
Check whether the programmed and saved parameters are
according to the beforehand measured parameters.
Technical Description DTCO 1381
11.6 Performing the regularly inspection
11 - 19
Advertisement
Chapters
Table of Contents
