Table of Contents
Advertisement
4.3 Tachograph cards
Faults (errors)
Control activities
4 - 18
The following faults are saved on the driver card:
•
Device fault of the DTCO 1381
•
Card fault if the driver card is the object of the fault
The following data will be saved about faults:
•
Fault code
•
Beginning – date and time (if the event continues while card
withdrawn, the date and time will be saved upon withdrawal)
•
End – date and time (if the event continues while card with-
drawn, the date and time will be saved upon withdrawal)
•
Vehicle registration number of the vehicle in which the fault
appeared
•
Place of registration of the vehicle in which the fault appeared
The twelve most recent faults of all types will be saved; in total, up
to 48 errors will be saved.
The following data will be saved about control activities:
•
Date and time of the control
•
Number of the control card, issuing member state
•
Type of control
– Display, printing, or downloading of data from memory
– Display, printing, or downloading of card data
•
Vehicle registration number of the inspected vehicle
•
Place of registration of the inspected vehicle
•
In the case of download, the time period (from / to) for which
the data was copied
The card data download can be saved on the tachograph card only if
this happens through the DTCO 1381. In other words, the card must
be located in a card slot on the DTCO 1381.
© Siemens VDO Automotive AG
Data handling
Edition 07/2007
Advertisement
Chapters
Table of Contents
