Displaying The Event And Fault Memory - Siemens VDO DTCO 1381 Technical Description

13.2 Displaying the event and fault memory

13.2 Displaying the event and fault memory

13.2.1 Driver 1 or driver 2 (inserted tachograph card)
Purpose
Step / menu display
1
2
3
4
13 - 6
The event and fault memory can be displayed / printed only when
the vehicle is motionless, and in the case of the ADR variant, only
when the ignition is turned on, see chapter 3.1.3 "Printing or display
of data", page 3-4.
In this menu you can display the saved events and faults of an
inserted tachograph card.
The procedure for driver 2 (tachograph card inserted in card slot 2)
is identical to that for driver 1 (tachograph card inserted in card
slot 1) and will not be described separately below.
Explanation / meaning
Starting from the standard display ...
– press repetitively the button
appears and
– acknowledge with the button
or
– Press the button .
– Select "display driver 1" with the button
– acknowledge with the button
– Select "driver 1 event" with the button
– acknowledge with the button
Similar to an event printout, all events and faults saved on the tacho-
graph card will appear.
Note
The 24 characters of a printout line are shown on two lines of the
display!
If you page backward while paging through the information, you will
be able to move backward only about 20 printout lines.
© Siemens VDO Automotive AG
Events and faults
until the display "call main menu"
.
or and
.
or and
.
Edition 07/2007