Data handling
4.3.2 Workshop card
Fixed data
Security elements
Card identification
Workshop information
(cardholder identification)
Edition 07/2007
All of the workshop-based data (fixed and variable) defined in
CR (EEC)) 3821/85, annex I B is saved on the workshop card.
An approved recording equipment manufacturer, vehicle manufac-
turer, installer, or a workshop uses its card to identify itself to the
DTCO 1381, enabling saving of activities under this identity.
After a positive authentication of a valid workshop card, the inter-
faces for calibration and testing the DTCO 1381, as well as the
access to displays, printouts, or downloading of memory data will be
enabled.
With the workshop card, transfers and test drives are possible.
•
Public European security key
•
Certificate of the issuing member state
•
Card certificate
•
Private security key of the card
•
PIN (Personal Identification Number)
•
Cryptological key for pairing the KITAS 2171
•
Detailed information about the card, such as serial number,
type, manufacturer, etc.
•
Card number
•
Issuing member state, name of the issuing authority / insti-
tution, date of issuance
•
Validity
•
Workshop name
•
Workshop address
•
Last name, first name of the cardholder
•
Preferred language
Technical Description DTCO 1381
4.3 Tachograph cards
4 - 19