4.2 The flow of data and memory behaviour
Driver activities
Location at the beginning and
end of the working time
Odometer
4 - 8
The following data will be registered and saved each time there is a
change of activity based on driver 1 or 2, the driving status (single/
team), or when the driver/workshop card is withdrawn:
•
Driving status
– Single (only one driver card is inserted)
– Team (two driver cards are inserted)
•
Card in slot 1 (driver) or card in slot 2 (co-driver)
•
Card status (inserted, not inserted) for the affected slot
•
Activity setting (time group: drive, availability time, pause, work)
•
Date and time of the change
Manual entries about activities are not stored in the data memory.
The following data will be registered and saved each time the
location at the beginning or end of the working time is entered:
•
Date and time of the entry or the manual entry
•
Type of entry
– Begin
– End
•
Card number of driver 1 or 2
– Issuing authority and country
•
Entered country and region
•
Odometer reading at time of the entry
Assuming that a driver makes two entries each day (at the beginning
and end of each day), this data will be saved over 365 days.
At time 00:00 on every calendar day the following data will be regis-
tered and saved:
•
Odometer reading
•
Date
© Siemens VDO Automotive AG
Data handling
Edition 07/2007