Preparing The Radio Compartment; Assembling Installation Frame In The Radio Compartment - Siemens VDO DTCO 1381 Technical Description

Installation

5.5.6 Preparing the radio compartment

Assembling installation frame in the radio compartment

Edition 07/2007
1
Fig. 5 - 12: Assembling installation frame in the radio compartment
1. Insert the installation frame (1).
2. Use a screwdriver to bend up cut-outs (2) with a screwdriver
and hook them onto the dashboard so that the installation
frame is sitting firmly in the radio compartment.
3. Lay all connection cables to the DTCO 1381 through the instal-
lation frame.
When using a specific vehicle installation frame always observe the
specifications of the vehicle manufacturer.
Technical Description DTCO 1381
5.5 Performing the installation
2
5 - 25