Lbsadp1 - IBM iSeries Series Hardware Problem Analysis And Isolation

RC0x Value
x020
x021
x022
x023
x024
x025
x026
x027
xD00
xD01
xD02
xD03
xD04
xD05
xD06
xD07
xD08
xD09
xD0A
xD0B
xD0C
xD0D
xD0E
xD0F
4. If replacing the possible failing items from the SRC does not correct the problem, replace the J-Tag
Cable. See Power and signal cables.
5. If the problem persists, replace the Service Processor.
v For Model 825, the Service Processor is part of the System Unit Backplane in location MB1. See
Model 825 - System unit backplane (MB1)
v For Models 870 and 890, the Service Processor is part of the Tower Card in the Base I/O Unit in
location CB1. See Models 870 and 890 (FC 9094) - Tower card - CB1.
6. If the problem still persists, call your next level of support.
For locations and removal and replacement information about possible failing items, see Locations —
Model 825 or Locations — Models 870 and 890 with an FC 9094 Base I/O Tower.
This ends the procedure.

LBSADP1

For use by authorized service providers.
The failing item is a combination HSL I/O bridge card and local bus adapter card in an FC 5077 SPD
migrated tower. Go to symbolic FRU LBSADP1 in the Migrated Expansion Tower Problem Analysis, Repair
and Parts manual on the V5R1 Supplemental Manuals web site
failing item.
358
iSeries: iSeries Server 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Hardware Problem Analysis and
Isolation
Location for Model 825
M02-C
M02-A
M02-D
M02-A
M02-G
M02-E
M02-H
M02-F
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Location for
Models 870 and 890
M18-A (control card)
M24-A (control card)
M07-A (control card)
M02-A (control card)
M25-A (control card)
M08-A (control card)
M01-A (control card)
M17-A (control card)
M27
M28
M22
M20
M29
M06
M13
M23
M05
M04
M10
M12
M03
M26
M19
M09
for information on servicing this