Failing Items - IBM iSeries Series Hardware Problem Analysis And Isolation

v Yes: Complete the IPL. When the operating system display appears, use the Work with Problem
command (WRKPRB) or Analyze Problem command (ANZPRB) to analyze and correct or report any
console problems.
This ends the procedure.
4. Do you have SRC A600 5001, A600 5004, A600 5007, or B075 xxxx (where xxxx is any value)?
v No: Continue with the next step.
v Yes: Perform the following:
a. Disconnect any cables that are attached to the IOA.
b. Install the wrap plug on the IOA. The 2745 wrap plug label is QQ.
c. Perform an IPL in Manual mode.
5. Does SRC 6A59 5007 occur?
v No: Continue with the next step.
v Yes: One of the following is causing the problem:
– Workstation emulation program
– Workstation
– Workstation console cable
This ends the procedure.
6. Did SRC A600 5001, A600 5004, or 6A59 5008 occur?
v No: This is a new problem. Use the new reference code to correct the problem (see System
Reference Codes) or ask your next level of support for assistance.
This ends the procedure.
v Yes: The Type 2745 workstation adapter is the failing item.
This ends the procedure.

Failing items

For use by authorized service providers.
Use this table to find the field replaceable unit (FRU) part numbers identified by a failing item code. If only
a type number is listed, go to the Type, model, and part number list to determine the part number.
Failing item code Description/Action
FI00015 FI00015 indicates that a local bus adapter card in a migrated tower is the failing item. See
the failing item table for this failing item in the Migrated Expansion Tower Problem Analysis,
Repair and Parts manual on the V5R1 Supplemental Manuals web site
FI00017 This failing item is in a migrated tower. See the failing item table for this failing item in the
Migrated Expansion Tower Problem Analysis, Repair and Parts manual on the V5R1
Supplemental Manuals web site
FI00020 FI00020 is not supported on these models. Continue with the next FRU in the list.
FI00021 FI00021 indicates that the combined function I/O processor (CFIOP) is the failing item.
Use the CFIOP type to determine the part number.
FI00022 FI00022 indicates that the Licensed Internal Code for the service processor may be the
failing item.
Ask your next level of support for assistance.
FI00030 FI00030 indicates a main storage card failure.
Power SRC 1xxx-xxxx No FRU replacement.
FI00040 See the symbolic FRU "BACKPLN" on page 284.
.
Analyze hardware problems
.
249