Ccin - IBM iSeries Series Hardware Problem Analysis And Isolation

Note: For part numbers, refer to Models 870 and 890 processor towers in the Power and signal cables
page.
Index
PWR21
PWR22
PWR11
PWR12
PWR13
PWR14
PWR15
PWR16
PWR17
PWR18
PWR19
PWR20
PWR05
PWR06
PWR07
PWR08
PWR01
PWR02
PWR03
PWR04
PWR09
PWR10
PWR23
Table 2. AC line cords — Description and units per assembly
Note: For part numbers, refer to the

CCIN

For use by authorized service providers.
Follow the instructions for the model you are working on.
v Models 270, 820, 830, 840, SB2, and SB3 (See page 303)
v
Models 800, 810, 825, 870, and 890 (See page )
Instructions for Model 270, 820, 830, 840, SB2, and SB3
There are two parts here:
v "Locations for processors and memory FRUs" on page 304
v "Processor configuration" on page 305
Units per
assembly Description
1 BPC-A J03 to Bulk Power Fan BPF-A, Cable attached to FAN
1 BPC-B J03 to Bulk Power Fan BPF-B, Cable attached to FAN
1 BPC-A J08 to DCA-1 J00, Red with white stripe
1 BPC-B J08 to DCA-1 J01, Red
1 BPC-A J09 to DCA-2 J00, Red with white stripe
1 BPC-B J09 to DCA-2 J01, Red
1 BPC-A J10 to DCA-3 J00, Red with white stripe
1 BPC-B J10 to DCA-3 J01, Red
1 BPD1-A J09 to DCA-4 J00, Red with white stripe
1 BPD1-B J09 to DCA-4 J01, Red
1 BPD1-A J10 to DCA-5 J00, Red with white stripe
1 BPD1-B J10 to DCA-5 J01, Red
1 BPC-A J04 to MDA-F1 J1, Red with white stripe
1 BPC-B J04 to MDA-F1 J2, Red
1 BPC-A J05 to MDA-F2 J1, Red with white stripe
1 BPC-B J05 to MDA-F2 J2, Red
BPC-A J06 to MDA-F3 J1, Red with white stripe
1 BPC-B J06 to MDA-F3 J2, Red
1 BPC-A J07 to MDA-F4 J1, Red with white stripe
1 BPC-B J07 to MDA-F4 J2, Red
1 BPC-A J02 to UEPO J00, Red with white stripe
1 BPC-B J02 to UEPO J01, Red
1 BPC-A/B P00 and M41 VPD to CB1 (FC 9094) VSCOMM
Analyze hardware problems
303