Figure 8-2 Removing Cabinet Covers; Right Side Covers (Front, Rear And Lower) - Tektronix PHASER 560 Service Manual

Right side covers (front, rear and lower)

Figure 8-2 Removing cabinet covers

Downloaded from www.Manualslib.com
Remove the lower front cover and the front and rear right side covers before
removing the right side lower cover.
1. Remove the paper tray.
Note Note that the lower side cover clips underneath the printer frame. Lift
the printer slightly to remove the lower side cover in the next step.
2. Remove the two screws securing each of the front and rear right side
covers in place. Remove the covers.
3.
Remove the lower side cover.
Toner level
sensor board
manuals search engine
Upper front
cover
Bottom front
cover (lift
Front door
printer to
remove)
FRU Disassembly/Assembly
Right side
covers
Rear
Front
Lower (lift
printer to
remove)
9697-09
Service Manual
8
8-5