Important Notes On Handling And Use - Roland MODELA MDX-50 Setup Manual

Important Notes on Handling and Use

This machine is a precision device. To ensure the full performance of this machine, be sure to observe the
following important points. Failure to observe these may not only result in loss of performance
but may also cause malfunction or breakdown.
This machine is a precision device.
Handle this machine carefully and never subject it to impacts or excessive force.

Carefully clean away cutting waste.

Use this machine within the range of its specifications.

Never attempt to move the spindle head or table by hand with undue force.

Never needlessly touch anywhere inside the machine except for locations specified in this document.

Install this machine in a suitable location.
Install this machine in a location that meets the specified conditions for temperature, humidity, and the like.

Install this machine in a quiet, stable location offering good operating conditions.

Never install this machine outside.

Never use this machine in an environment where silicone substances (oil, grease, sprays, etc.) are present.

Doing so may cause poor switch contact.
This machine becomes hot.
Never cover this machine with cloth or a similar object or cover the gaps with tape.

Install this machine in a well-ventilated location.

About tool burs
Use an appropriate tool bur that matches the workpiece and the cutting method.

The tip of the tool bur is breakable. Handle the tool bur with care, being careful not to drop it.

This machine is suited to cutting resins.
Never use this machine to cut metal.

17