〇〇●〇
STEP 3 : Confirm the Command Set
Select the appropriate command mode to match the software to be used.
""Command Set"
(p. 15)
NC Code file outputting
""NC Code Specifications"
CAUTION
If a command that is sent to the machine is different from the command set
selected on the VPanel, an error occurs and cutting becomes impossible.
Command Set Setting
Procedure
1.
Click
[Setup]
on the VPanel.
(p. 111)
2.
Select the suitable command set.
"Piano.stl"
:
[RML-1]
83
Preparing the Machine
[OK]