Answering A Call; Displaying Telephone Numbers (Clip) - Siemens Gigaset 4010 Classic Operating Instructions Manual

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Press keys:
F?
or

Answering a call

Your telephone rings (ringer) and the status LED flash-
es.

Press the talk key
Simply remove the handset from the base station (fac-
tory setting: Auto talk, see page 46).
¬
If the ringer is disturbing you: Open the
menu via
As long as the call is displayed, you can ac-
cept it by pressing the talk key
ple.
Setting the handset volume (while you are
talking, see page 45).

Displaying telephone numbers (CLIP)

The network provider must support the calling line
identification (CLIP) and the telephone number must
have been transmitted. Contact your network provider.
An incoming call is displayed as follows (example):
Telephone
number
If the number received is saved in the handset directo-
ry, the stored name is displayed (example:
If the telephone number or the name is not displayed,
you see:
UNAVAILABLE
CLIP Calling Line Identification Presentation =
Displaying the caller's telephone number
Calling Line Identification Restriction = display
CLIR
of the incoming telephone number sup-
pressed.
telef.fm
MENU and select
0 0
 
&
If you have not requested CLIP .
If the caller has not requested the tel-
ephone number transmission or if
display of the number was deliber-
ately suppressed by the caller (CLIR)
11.06.01
Making calls
SILENT .

for exam-
).
ANNE
13